|
||
|
|
|
|
IP2X test probes | |
 |
Measurement accessories with high
breaking capacity fuses According to IEC 61010-1 / 61010-031 (download our catalogue pages  ) |
 |
Line 5700 fuse-holders are safety devices providing interface between operators, professional or industrial or educational electrical equipments and tested points.
Environmental terms are :
|
 |
| Example of standard fuse-holder, Ø4 mm male - Ø4 mm female. P / N 5704-Sd. |
Example of class CC fuse-holder lead, Ø4 mm male - Ø4 mm male right angled with cable. P / N 5705-CC. |
Fuse-holders available in class CC or standard version :
(recognizable by their rejection feature), US
standard
, european standard Thanks to the anti-error device of these fuse-holders it is impossible to install a standard fuse in a class CC fuse-holder.
| 10 x 38 mm (0.41 x 1.50 in) fuse specifications | 10 x 38 mm (0.41 x 1.50 in) standard fuses | 10 x 38 mm (0.41 x 1.50 in) class CC fuses |
| Voltage : | 500 V | 600 V |
| Currents range : | 2 A, 6 A, 10 A, 16 A, et 20 A | 2 A, 6 A, 10 A, 15 A, et 20 A |
Breaking capacity  : |
120 kA (120 000 A) |
200 kA (200 000 A) |
| Design : | (symmetrical) |
Anti-error device (rejection feature) |
Several types of available connections :
Available versions :
| Class CC or standard version fuse-holder, with or without fuse |
| Ends of the fuse-holder : |
| Ø4 mm female | Ø4 mm female |
P / N 5701-Sd (standard version) or P / N 5701-CC (class CC version) |
| Ø4 mm male | Ø4 mm female |
P / N 5704-Sd (standard version) or P / N 5704-CC (class CC version) |
| Ø4 mm male | cable with |
|
Type 5705-Sd (standard version) or Type 5705-CC (class CC version) |
| Ø4 mm female | cable with |
|
Type 5703-Sd (standard version) or Type 5703-CC (class CC version) |
| cable with |
|
cable with |
|
Type 5702-Sd (standard version) or Type 5702-CC (class CC version) |
Electrical specifications :
set by the fuse
)
| Fuse-holders shipped with cover unlocking special tool. As required by the standard, for safety reasons, the cover can not be opened manually, and a special tool is required to open cover and replace fuse. |
|
Other specifications :
|
Test probes - IP2X with high
breaking capacity fuses According to IEC 61010-1 / 61010-031 (download our catalogue page ) |
|
Our line 5800 test tips equipped with high breaking capacity 10 mm x 38 mm (0.41 in x 1.50 in) fuses are built according to the above standard requirements. Their achievement needs a supplementary enclosure which prevents persons against access to hazardous parts with their fingers : IP2X.
|
 |
||
|
Class CC fuse-holder test tip, Ø4 mm connectable tip - Ø4 mm female connector. P / N 5801-CC. |
|
Example of
standard fuse-holder test tip lead, |
Specifications (details lower) :
Electrical specifications :
set by the fuse )
Fuse-holder test tips available in standard or class CC version :
(recognizable by their rejection feature), US
standard, European standard Thanks to the anti-error device of these fuse-holder test tips, it is impossible to install a standard fuse in a class CC fuse-holder test tip.
| 10 x 38 mm (0.41 x 1.50 in) fuse specifications | 10 x 38 mm (0.41 x 1.50 in) standard fuses | 10 x 38 mm (0.41 x 1.50 in) class CC fuses |
| Voltage : | 500 V | 600 V |
| Currents range : | 2 A, 6 A, 10 A, 16 A, et 20 A | 2 A, 6 A, 10 A, 15 A, et 20 A |
| Breaking capacity : |
120 kA (120 000 A) |
200 kA (200 000 A) |
| Design : | (symmetrical) |
Anti-error device (rejection feature) |
| Light indicator of blown fuse : An orange neon indicator lights when the fuse is blown. |
 |
| Long and fine tip : The length (26 mm, 1 in) and the fineness (Ø3.8 mm, 0.15 in) of the tip itself allows measurements in well bottom to 26 mm (1 in). |
 Retracted sleeve |
Thanks to its sleeve specially designed, the test tip can be safely connected to
range (
) It can be also connected to basic Ø4 mm female sockets
generally limited to non hazardous live voltages 33 V~ / 70 V
.
| Easy handling with gloves |  |
Several types of available connections (in addition of Ø4 mm connectable tip) :
Available versions :
| Class CC or standard fuse-holder test tip, with or without fuse |
| Ends of the fuse-holder test tip : |
| Ø4 mm connectable tip | Ø4 mm female |
P / N 5801-Sd (standard version) or P / N 5801-CC (class CC version) |
| Ø4 mm connectable tip | cable with |
|
Type 5807-Sd (standard version) or Type 5807-CC (class CC version) |
| Fuse-holder test tips shipped
with cover unlocking special tool. As required by the standard, for safety reasons, the cover can not be opened manually, and a special tool is required to open cover and replace fuse. |
|
Other specifications :
|
IP2X Test probes According to IEC 61010-1 / 61010-031 (download our catalogue page ) |
  |
Our line 5800 test tips are built according to the above standard requirements. Their achievement needs a supplementary enclosure which prevents persons against access to hazardous parts with their fingers : IP2X.
 |
 |
||
|
Test tip, Ø4 mm connectable tip - Ø4 mm female connector. P / N 5802. |
|
Test tip lead, Ø4 mm connectable tip - Ø4 mm male right angle connector. P / N 5812. |
Specifications (details lower) :
Electrical specifications :
or 600 V, measurement category IV (CAT IV) )
| Long and fine tip : The length (26 mm, 1 in) and the fineness (Ø3.8 mm, 0.15 in) of the tip itself allows measurements in well bottom to 26 mm (1 in). |
Retracted sleeve |
Thanks to its sleeve specially designed, the test tip can be safely connected to
range (
) It can be also connected to basic Ø4 mm female sockets
generally limited to non hazardous live voltages 33 V~ / 70 V.
| Easy handling with gloves | |
Other specifications :
Measurement accessories from the Electrop-PJP's "IP2X" range compliant with the above tips :
|
|
|
"Very high safety" products - IP2X connection.
Principle : to be able to connect the end of a lead's tip, unprotected, without any risk
for the operator. Meanwhile, the usual safety rules must be applied. (download our catalogue
page ) |
|
|
||
 |
|
 |
|
| Test-clips, connection clamps.
|
P / N 6005-IP2X
|
Test-clips, connection
alligator clips.
|
P / N 6007-IP2X
|
|
|
||
 |
|
 |
|
| Test-clips, connection hook.
|
P / N 6008-IP2X
|
Rigid test-clips, connection
alligator clips.
|
P / N 6009-IP2X
|
|
|
 |
 |
 |
| |
|
||
 |
 20 A P / N 5450-IP2X |
 |
36 A P / N 405-IP2X |
| Alligator clips under rubber sheath. | Ø2 mm smooth test tip. Application : transforms a Ø4 mm connectable test tip into Ø2 mm smooth test tip. | ||
Special right angle connectors. Ø4 mm smooth tip stripped on 19 mm (0.75 in) (P / N 60619-IP2X) or 25 mm (0.98 in) (P / N 60625-IP2X). Example of application : connects onto terminals. |
 |
20 A P / N 60619-IP2X and 60625-IP2X |
Definitions (according to IEC 61010-031 standard, "Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031 Safety requirements for hand-held probe assemblies for electrical measurement and test") : CAT III (measurement category III) : measurements performed in the building installation. Examples are measurements on distribution boards, circuit-breakers, wiring, including cables, bus-bars, junction boxes, switches, socket-outlets in the fixed installation, and equipment for industrial use and some other equipment, for example, stationary motors with permanent connection to the fixed installation. Reinforced insulation and double
insulation ( Pollution : addition of foreign matter, solid, liquid or gaseous (ionized gazes), that may produce a reduction of dielectric strength or surface resistivity. Pollution degree 2 : normally only non-conductive pollution occurs. Occasionally, however, a temporary conductivity caused by condensation must be expected. Breaking capacity : maximum current a fuse is able to break safely. The breaking capacity of the class CC fuses is more than one of the standard fuses ( 200 kiloAmpere against 120 kiloAmpere ) because they are intended to protect high power circuits. For this reason, they must not be replaced unintentionally by standard fuses else they may explode and create damages and hurts in case of overload. |
| Contact : | Address : Electro PJP 31 rue Julien
Feuvrier BP366 F-39105 Dole France Phone : (33) Ø3 84 82 13 30, Fax : (33) Ø3 84 82 40 48 E-mail : mail@electro-pjp.com, Web : http://www.electro-pjp.com |
) : protection insulation equal to 2 basic insulation at least.
Required for any hand-held accessory.