|
5000 V CAT I |
| transient overvoltages 2 kV | |
 pollution degree 2 6 A |
Warning : these high voltage products require the highest caution when using, notably never connect or disconnect a fed circuit. |
|
5000 V CAT I |
| transient overvoltages 2 kV | |
| pollution degree 2 6 A |
 Type 5600/5600-HT |
 |
Type 5600/5500-HT |
  |
| 2 Ø4 mm male connectors lead. | Lead equipped with clips into supple sheath at one end and with a Ø4 mm male connector at the other end. | ||
|
P / N 5450-HT |
 |
Type 5500/5500-HT |
|
| Clips into supple sheath for Ø4 mm male connector lead (20 A). | Lead with clips into supple sheath. | ||
Type 5500-HT |
  |
Type 5600-HT |
|
Lead with clips into supple sheath at one end and bare wire extremity at the other end. Please consult us. Because this lead has got a bare wire extremity, it is not ready to be used. It needs to be standardized. So, clearance and creepage distance must be more than 51 mm. |
Lead with a Ø4mm male connector at one end, and a bare wire extremity at the other end. Please consult us. Because this lead has got a bare wire extremity, it is not ready to be used. It needs to be standardized. So, clearance and creepage distance must be more than 51 mm. |
||
| Male connectors
mechanically compliant with all Ø4 mm ELECTRO-PJP female connectors.
Beware of electrical compliance: check and compare max. rated characteristics of each
part, and keep only the lowest characteristic. So,
above Ø4 mm 5000 V male connectors can be mated to Ø4 mm ordinary female sockets. Few modifications are so required to
keep away the female socket from any user touch. |
 |
Other specifications :
- colours red or black (grey cable)
- lead length 100 cm (39.4 in) or 150 cm (59.1 in)
| Contact : | Address : Electro PJP 31 rue Julien
Feuvrier BP366 F-39105 Dole France Phone : (33) Ø3 84 82 13 30, Fax : (33) Ø3 84 82 40 48 E-mail : mail@electro-pjp.com, Web : http://www.electro-pjp.com |
